Gutter Parts

A gutter is a U-shaped or V-shaped channel that is installed along the edge of a roof. Its main purpose is to collect and redirect rainwater away from the foundation of a house. Without gutters, rainwater would flow down the side of the house and cause serious damage to the structure.

Gutter parts
  1. Leaf screen
  2. End cap
  3. Drop outlet
  4. Downspout
  5. Splash block
  6. Pipe strap
  7. Connector
  8. Diverter
  9. Extension
  10. Elbows
  11. Hangers

There are four main parts to a gutter system: the gutter itself, the downspout, the gutter brackets, and the gutter guard.

The gutter is the long, U- or V-shaped channel that runs along the edge of the roof.

The downspout is a pipe that carries water from the gutter to an underground drainage system or right into a rain barrel.

The gutter brackets are what hold the gutter in place.

The gutter guard is a mesh or foam insert that helps to keep leaves and other debris from clogging up the gutter.

However, there are a few other gutter downspout parts that you may need to purchase in order to properly install or repair your gutters. These parts include the gutter downspout elbow, gutter downspout extension, gutter downspout support, and gutter downspout top.

The gutter downspout elbow is used to change the direction of the water flow, while the gutter downspout extension allows you to extend the length of the downspout. The gutter downspout support, downspout straps, or gutter hangers helps to keep the gutter and downspout in place, and the gutter downspout top is used to seal off the end of the downspout. If you are unsure which parts you need, you can always consult with a professional before making your purchase.

In order for a gutter system to work properly, all of these parts must be installed correctly and maintained on a regular basis. If any one part fails, it can cause serious problems for your home. That’s why it’s important to have a professional inspect your gutters at least once every year.

Gutter parts diagram

Rain gutter installation